Double Glazing Lock Repairs
A good quality lock on your windows and doors helps to prevent burglars from accessing your home. They generally don't like breaking glass or trying to wiggle through open windows.
Certain double glazing owners however, have had issues with their window or door lock following the installation. Luckily, these problems are often fixable without having to buy new double glazing.
Broken or faulty locks
If your uPVC door or window lock is broken or faulty and requires a locksmith, they can fix it. They will be able to repair the striker plates, hinges and locks on your double glazing. They can also reposition the cylinder to fix any misalignment which could be causing your handle to work properly.
The mechanism may be locked when the key is inserted into the lock, but it does not turn or be difficult for you to insert. Grease or dirt can be trapped in the mechanism. If this is the case, it is possible to clean the lock and then lubricate it. It is essential to make use of a dry lubricant such as teflon or graphite instead of oil, which attracts dirt and adhere to the inside of the mechanism. After having lubricated, insert the lock key into the lock and turn it. The lubricant should work through the mechanism, and the lock should be able to turn with ease.
A malfunctioning lock could be caused by loose screws within the mechanism of the lock. They may loosen and fall out or break off completely and stop the lock from functioning properly. The screws can be tightened by using the help of a screwdriver. However, be careful not to overtighten them. This can damage the internal components.
A damaged lock can be dangerous for you and your family. This is especially true if you have small children. It can be easy for them to unlock the door without you knowing, and this can give them access to your home. If you are worried about this happening, a licensed locksmith can offer fast and efficient assistance to re-secure your double glazing doors.
Misty Glaze are a professional uPVC and double glazing company based in Lancing that can fix all kinds of damaged and broken mechanisms such as handles, cylinders, handles and lock systems on both uPVC windows and doors. We can also alter the locking system of your uPVC windows or double glazing to meet your requirements. This means that replacement windows or doors are not always required.
Handles that are damaged or broken
As part of their overall security plan, most double-glazed windows feature a multipoint lock. This is a great option for those worried about potential thieves who may try for ways to gain access to your home. It's also worth asking your installer about anti-lift locks, these can be fitted on top of the existing locks and will keep your window secured in its closed position.
It's not uncommon for handles to be damaged or even fail - they are the first component of your window that will be forced open by criminals intent on breaking in. The good news is that this is among the easiest parts to fix.
Modern uPVC handles as well as aluminium handles are equipped with a multi-point locking mechanism, referred to as Espagnolette, which is designed to ward off forced entry. This security upgrade is available as an option on new uPVC windows. As an upgrade option, older handles made of aluminium or uPVC that are no longer used can be upgraded to the shoot bolt locking system.
When a handle is faulty it is essential to get the handle repaired as soon as is possible. A damaged handle could prevent the window from closing properly and permit drafts to get in. It could be a weakness that opportunistic burglars might exploit, putting your belongings and family at risk of theft.
The process of fixing the malfunctioning mechanism begins by gaining access to the frame of the window and then removing the damaged handle. The gearbox that opens the handle is then accessed and the type more info identified so that a replacement can be found that matches the profile of the internal window frame mechanisms.
After the mechanism has been replaced the handle can be re-attached using the original screws - however, we generally recommend replacing them with larger ones since this will provide an even more secure fit. The final step is to seal the handle with an opaque sealant. This will help protect it from further deterioration. Once that's done, your window will be functional again, and at a double glazing company near me fraction of the cost of replacing the entire window.
Hinges that are broken or faulty
If your windows don't close properly, you could experience draughts, a weakening of your home's security, and an increased chance of damp or water damage. Window hinges that fail or fail are a common issue and can be easily repaired.
If your uPVC windows won't open or close it's likely that the hinges need to be replaced or repaired. Many window companies will require you to purchase an entirely new window unit in order to fix this simple issue, but we can replace the hinges to save you money.
Window hinges are usually damaged through repeated use, or weakened over time by corrosion. If you have a broken window hinge, it's important to take precautions to prevent further damage. This means not causing the window to close or open.
Identifying your hinge type will help you locate the right parts to repair it. Maco, Mila and Roto are all manufacturers of window hinges. Get advice from a professional before purchasing parts that will not fit with your existing hardware. This can cause further damage.
A damaged hinge can be a big issue for your uPVC window and doors. They can be the main source of noise and can also allow water to enter your windows.
Verify whether the pin barrels on both sides of the hinge are aligned. If it isn't then tap the head pin using an hammer to create an arc in the barrel of the hinge. This will hold the pin in place. Have a person hold the doors as you take off hinge screws and hinges. Replace the hinges and then install screws using glue. Finally put the hinges in place using clamps or weights while the glue dries.
After you have fixed your hinges, you are double glazed window suppliers near me able to install the door again. You can also reattach the handle. It is recommended to replace the screws with the same length of dowels as the screw that was originally used so that they are in line with each other.
Broken or damaged glass
uPVC Windows can become damaged over time, despite the fact that they are excellent at keeping cold out and keeping heat. This could include damaged or broken glass and damaged locks. This is a problem that could be extremely costly should it be left unattended. It can also affect the aesthetics of your house and could lead to a loss of insulation, which is why it's crucial to repair any damage as quickly as you can.
If your glass has cracked but not shattered, you can usually fix it yourself using the appropriate tools and techniques. First, make sure that the area around the glass is clear so that any shards won't harm anyone and aren't an accident-prone area. Remove the broken glass pieces and dispose of them in the appropriate manner. Apply masking tape over the entire area. This will stop shards of glass from sticking to your skin and splintering when you move them. Making sure the glass pane get more info is fitted prior to applying glue is an ideal option if you are dealing with windows with two panes. This will ensure that you have enough space to finish your project.
Before applying the glue clean the surface of the damaged frame and glass with a a dry, clean cloth. Follow the curing and application instructions that differ from product-to-product. Based on the degree of the crack you may need to clamp the glass in place during the curing process with lightweight clamps specifically designed to support fragile materials.
When the adhesive has completely cure, carefully install the glass in the window frame, making sure it's flush with the edge of the frame, and there aren't any gaps between the glass and the window sash. Be cautious not to flex the window as it's being put back in place, as this can weaken the seal and lead to condensation and water infiltration.
If you have a glass door that's broken completely or has bigger cracks, contact an experienced professional glazier such as O'Brien(r) to click here organise an exchange. It's crucial to act fast if you have broken glass.